Made in the USA
107 Clay Street, North East, PA 16428 davidlee@davidleefurniture.com
phone: 800-926-3853 fax: 814-725-2383
May 14, 2023
May 14, 2023
May 14, 2023
May 13, 2023
May 13, 2023
May 13, 2023
October 11, 2022
October 11, 2022
March 12, 2020
March 12, 2020
March 12, 2020
January 10, 2020
February 20, 2018
February 20, 2018
February 20, 2018
February 20, 2018
February 20, 2018
September 28, 2017
Custom Buffet-Dimensions are 38W x 15-1/2D x 36H.
March 31, 2017
Features 2 interior fixed shelves and 2 metal hangers on back for wall mounting.
March 3, 2017
Features sheafback styling and a wood seat.
Seat is 19-1/2 W x 18-1/2 D, and sits 18-1/4 H from floor.
Top of back is 24 H from seat.
Arm is 7-1/2 H from seat. 20 W between arms at front, 17 W between arms at middle, 14 W between arms at back.
(As with all our seating, dimensions are approximate. We recommend that you wait until you receive your item before purchasing custom cushions.)
March 2, 2017
Features a plank-style top.
A leaf or leaves may be added to any standard size of this table at an additional upcharge. Please see “Product Options” section below.
March 2, 2017
Features 4-drawer storage on metal/nylon drawer glides.
March 2, 2017
Features 5 drawers (1 smaller faux-front top drawer and 4 larger bottom drawers) with metal drawer glides.
March 2, 2017
Features 4 drawers on metal/nylon drawer glides. The top drawer has a faux front.
March 2, 2017
March 2, 2017
March 2, 2017
Features 1 drawer with wooden drawer glides and hidden storage with 1 fixed shelf.
March 2, 2017
Features dentil moulding detail and 2 adjustable shelves.
March 2, 2017
Features open display a beadboard interior back, 3 adjustable shelves with plate grooves, and 1 faux front drawer with metal/nylon drawer glides.
March 2, 2017
Features 4 fixed shelves (5 display surfaces).
(Shown with LYBR-Library Bookcase-Right and LYBL-Library Bookcase-Left.)
March 2, 2017
Features beadboard interior back and 3 adjustable shelves.
March 2, 2017
March 2, 2017
March 2, 2017
Requires the use of a box spring to support the mattress.
While removable, we recommend that the top canopy rails be used at all times, to keep the slim posts from “wandering” if exposed to heat or humidity.
An an option, a trundle that accommodates a twin-sized mattress (38 W x 75 L x 8 D) is now available for all styles and sizes of beds (Item #TTB1); however, all beds must be customized to allow for the insertion of the trundle between the feet and/or under the side rail. PLEASE REQUEST A CUSTOM QUOTE FOR THE BED WHEN ORDERING A TRUNDLE. Please note that the trundle will be twin-sized, regardless of the size of bed ordered.
March 2, 2017
Queen size fits mattress size 60 x 80. Must use a box spring to support the mattress.
While our headboards are made to fit our frames and footboards, Headboard Only is available as NMB1H, NMB2H, NMB3H and NMB4H.
Headboard, if ordered separately, is not drilled for the attachment of your particular frame. While a mounting board will be included with your purchase of a headboard-only, frame and/or headboard modification and attachment (and any costs associated therewith, including hardware) are the responsibility of the purchaser.
An an option, a trundle that accommodates a twin-sized mattress (38 W x 75 L x 8 D) is now available for all styles and sizes of beds (Item #TTB1); however, all beds must be customized to allow for the insertion of the trundle between the feet and/or under the side rail. PLEASE REQUEST A CUSTOM QUOTE FOR THE BED WHEN ORDERING A TRUNDLE. Please note that the trundle will be twin-sized, regardless of the size of bed ordered.
March 2, 2017
Queen size fits 60 x 80 mattress. (Queen mattress opening is approximately 60-3/4 W x 81 L.)
Must be used with a box spring to support the mattress.
On all sizes, the box spring sits approximately 11 H from floor. Clearance at floor under the footboard is approximately 9-1/4″, under the headboard is approximately 12-1/4″.
While our headboards are made to fit our frames and footboards, Headboard Only is available as HLB1H, HLB2H, HLB3H and HLB4H.
Headboard, if ordered separately, is not drilled for the attachment of your particular frame. While a mounting board will be included with your purchase of a headboard-only, frame and/or headboard modification and attachment (and any costs associated therewith, including hardware) are the responsibility of the purchaser.
An an option, a trundle that accommodates a twin-sized mattress (38 W x 75 L x 8 D) is now available for all styles and sizes of beds (Item #TTB1); however, all beds must be customized to allow for the insertion of the trundle between the feet and/or under the side rail. PLEASE REQUEST A CUSTOM QUOTE FOR THE BED WHEN ORDERING A TRUNDLE. Please note that the trundle will be twin-sized, regardless of the size of bed ordered.
March 2, 2017
Queen size fits mattress size 60 x 80. Must use with a box spring to support mattress.
While the headboards are made to fit our frames and foot-boards, Headboard-Only is available as CB01H, CB02H, CB03H and CB04H.
Headboard, if ordered separately, is not drilled for the attachment of your particular frame. While a mounting board will be included with your purchase of a headboard-only, frame and/or headboard modification and attachment (and any costs associated therewith, including hardware) are the responsibility of the purchaser.
A trundle that accommodates a twin-sized mattress (38 W x 75 L x 8 D) is now available for all styles and sizes of beds (Item #TTB1); however, all beds must be customized to allow for the insertion of the trundle between the feet and/or under the side rail. PLEASE REQUEST A CUSTOM QUOTE FOR THE BED WHEN ORDERING A TRUNDLE. Please note that the trundle will be twin-sized, regardless of the size of bed ordered.
February 24, 2017
Intended for media use, this unit features wrap-around doors on the top section, with a built-in component bridge, 1 adjustable shelf and a beadboard interior back.
The base unit has 2 adjustable shelves and a beadboard interior back.
The back panel of the unit is drilled for component wires at the bottom center and in each component opening of the top section, and in the top center of the base section.
Shown with a 46″ Flat Screen TV that measures 42-1/2 W x 27 H.
February 24, 2017
Intended for use as an entertainment center, this unit features wicker panels in doors and drawer, pocket-doors, VCR ridge, and it drilled for TV/component wires. (TV sits approximately 25 H from floor.)
February 24, 2017
Flat screen TV hutch & console (shown w/46″ flat screen TV), with 1 adjustable shelf for above TV, 2 adjustable shelves for base unit. Beadboard back panels are drilled for wires at the bottom center of the top section, and at the top center of the base section. The base doors have seedy glass panels. There is no top-to-bottom interior divider in the base, and the shelves are full-width at approx. 46-1/4 L.
Shown with a 46″ Flat Screen TV that measures 42-1/2 W x 27 H.
February 24, 2017
Features components storage space with beadboard interior back and 2 adjustable shelves. The back panel of the unit is drilled for component wires at the top center.
Shown with a 46″ Flat Screen TV that measures 42-1/2 W x 27 H.
This unit can be ordered as HFS80, which includes a top hutch and the base console.
February 24, 2017
Intended for use an an entertainment center, this unit comes standard with wrap-around doors, 1 adjustable shelf, and the unit is drilled for TV/component wires. Interior drawers have wooden drawer glides; exterior drawers have metal/nylon drawer glides.
February 24, 2017
Intended as a wall-mount cabinet, this unit mounts to your wall with either the metal hanging brackets attached, or through holes drilled in the interior corner blocks (recommended), with your mounting hardware. (Please remove the metal hanging brackets if you intend to mount the unit to the wall through the pilot holes in the corner blocks.)
PLEASE NOTE that we do not supply the hardware required to attach the unit to the wall. You will need to determine the required hardware based on the weight of the unit (approx 56 lbs) and the type of wall to which it is being mounted. The pilot holes drilled in the corner blocks are 1/8″, with a 5/16″ countersink opening.
Bi-fold doors allow easy access to the TV, and the unit is 76″ wide with the doors open and in the folded position. (Please note that the doors do not lay flat against the sides of the unit.)
Shown with a 46″ flat screen TV (measuring 42-1/2 W x 27 H), this unit accommodates wall-mounted flat screen TVs up to 51 W x 32 H x 7 D, or 43 W x 36 H x 6 D. (Mounting blocks at the back of the top interior corners make the unit only 43 W between the blocks at the very top.)
If setting the TV inside the cabinet (rather than mounting the TV to the wall), the unit is only 6 D at the interior bottom. We do not recommend mounting the unit to the wall if you intend to set the TV inside the unit, but rather placing the unit on top of a floor cabinet. Wall-mount of TV is recommended with this unit.
To use the unit as-is, your TV must be mounted to the wall, with all wiring housed within the wall. If your wiring will run down the outside of the wall, you must request that we drill a hole in the bottom of the unit so that the wires can pass through. There is no back on this unit, and your wall will be the backdrop for the TV.
Shown here with our HFS40B-Hillsboro Media Console.
February 24, 2017
Features hidden storage with 2 adjustable shelves, and 6 drawers with metal/nylon drawer glides.
February 24, 2017
Top section features open display with beadboard interior backs, 1 adjustable shelf for top center, 6 adjustable shelves for top sides, and 1 removable VCR bridge.
Base section features hidden divided storage with 2 adjustable shelves, and 6 drawers with metal/nylon drawer glides.
Intended for use with a TV, this unit is drilled for component wires behind the left/right sides of the removable VCR bridge.
February 24, 2017
February 24, 2017
Features bi-fold doors with seedy glass panels, beadboard interior back, and 2 adjustable shelves. As this unit is intended for use with media components, the upper back panel is drilled for wires.
Shown with a 46″ Flat Screen TV that measures 42-1/2 W x 27 H.
This unit coordinates with our HFS40-Hillsboro Flat Screen TV Wall-Mount Cabinet.
February 24, 2017
Intended for media storage, this unit features 2 full-width adjustable shelves (46-1/4 L) and seedy-glass door panels. The beadboard interior back panel is drilled for wires at the top center.
Shown with a 46″ Flat Screen TV that measures 42-1/2 W x 27 H.
February 24, 2017
Features open display with beadboard interior back, fixed VCR bridge and 1 adjustable shelf in top center; 6 adjustable shelves for top sides (3 each side); and 6 drawers with metal/nylon drawer glides.
Intended for use with a TV, this unit is drilled for component wires are the bottom of the TV opening, and in each of the fixed VCR openings.
TV sits 40 H from floor, on fixed VCR bridge.
February 24, 2017
Intended for use as an entertainment center, this unit comes standard with upper pocketdoors, a removable double VCR bridge, 4 adjustable shelves for lower center section, and it is drilled for TV/component wires in upper and lower center sections. It also has 8 adjustable shelves with plate grooves for the left and right units.
TV sits 43-1/4 H from floor with removable VCR bridge, 32-1/2 H from floor without removable VCR bridge.
Center back removable cutout is 34-1/2 W x 39 H.